Winterizing & Weather-Stripping

Posted on April 28, 2011 by admin

Now that cold weather is upon us, it is time to consider winterizing your home. With soaring electric bills, one huge consideration is heating costs. There are a few simple steps that you can take to substantially lower your heating bills and stay warm in the process.

First, you will need to inspect your home. Check the exterior first. Check the roof for missing shingles or leaks. Make any necessary repairs. If your home has a fireplace, check to make sure that the chimney is in working order. Replace any broken or cracked bricks. Now make sure that your gutters are free of debris. Check the exterior window screens and window casings.

Now, you want to check the interior. Check the fireplace first. Repair any cracked or broken bricks, check the damper to make sure that it is working properly and shuts tightly, and clean out all of last years ashes.

Walk through every room. You will need to check all electrical outlets to make sure they still fit close to the wall. Now check all windows. More heat escapes and cold air penetrates through loose or broken windows than any other area of your home.

If you have an older home, you will need to pay close attention to your windows. Weather stripping your windows is one easy and inexpensive way to save money on your electric bills.

If you are planning on installing the stripping yourself there are a variety of choices:

· Felt-If you are on a tight budget felt will work. It will not insulate as well as the others, but it will definitely work and is very easy to install.

· Foam-It should have adhesive on one side for easy installation.

· Interlocking-This is probably the most difficult to install as the pieces need to fit together perfectly, so you may consider hiring a professional.

· Spring Metal-It is usually packaged in a roll and should come with the brads you will need to install it.

· Vinyl-It comes hollow or foam-filled and it is generally applied to the exterior of your home. The foam-filled provides more insulation than the hollow variety.

You should be able to find most weather stripping at any home improvement store and the majority will be sold separately or in a kit that will include all of the hardware that you will need and they are all sold in a variety of colors and finishes. Depending on which type you choose, you will need a few simple tools-a hammer, screwdrivers, tape measure, pencil, scissors, and a hack saw or tin-snips.

Prior to installing the new weather stripping, remove any old stripping or debris. Now is probably a good time to clean around the windows and window sills. If you are applying adhesive stripping, make sure that everything is completely dry before starting the application process.

It is best to install weather stripping to windows before the cold weather hits. Set aside a nice day and take your time. This is not difficult but does take patience. As with all home improvement, if you have any questions, consult a professional.

Posted in Energy Efficient Windows and Siding, Home Improvement, Home Improvement Tips, Replacement Windows | Tagged , , , , | Comments Off

Tips on Making Your Own Storm Windows

Posted on April 14, 2011 by admin

With today’s rising costs on everything from fuel to home improvement, learning to do some things yourself and taking the time to do them can save you a lot of money in the long run. One easy way to save money is by making your own storm windows.

First calculate the dimensions of each window in your home and decide if you want a single (full-length), two-piece, or three-piece sash. The single storm sashes are the simplest to assemble but the two or three piece are sturdier. If any window is larger than 9 square feet, you will need to assemble the two or three piece sash. Depending on your budget, the least expensive storm windows are made of aluminum and can be made for much less than ready-made storm windows.

The tools that you will need:

  • Hacksaw
  • Small Miter Box
  • Sturdy Hammer & Nails
  • Small Screwdrivers (regular and Philips Head)
  • Jamb Brackets & Screws
  • Combination Square
  • Sturdy Clear Tape

Depending on the type of sash that you are making you will need to follow the following dimensions:

  • Single Sash-1/8 inch smaller than the width and height of the window
  • Two-Piece-1/4 inch smaller than the width and height of the window
  • Three-Piece-3/8 inch smaller than the width and height of the window

You might also be interested in placing storm windows on basement windows. If so, the storm windows can be installed on the inside and are usually ¾ inch more than the width and height of the windows. They can be secured with wood screws.

Since most home improvement stores offer free glass-cutting if you purchase the glass at their store, you will not have to worry about this. Remember to have the glass cut

1 1/16 inch smaller that the outside measurements of the aluminum frame (See Above). Single strength glass is acceptable, but double-strength can be purchased for a few pennies more and is well worth it. All you will need to concern yourself with is the aluminum sashes and corner locks and the proper tools.

If you are replacing old storm windows you can check the measurements of the aluminum prior to sizing and cutting the new aluminum. The original storm windows probably fit perfectly so using them as a guide will make your job easier.

Now remove the glazing channel before cutting the new aluminum sash. Place the channel around the perimeter of the glass, taping into place if necessary. Use the combination square to show 45° angles, and then cut the glaze from the corner and the aluminum with a hacksaw. File off any rough edges.

You are now ready to push the corner locks into place. Place the new sashes over the top and bottom on the pane, then add the sides. Make sure that the new sashes fit snugly and they are centered.

For added security, mount two jamb brackets (one on each side) to the top of the window about 1 inch from outer corner of the window casing. Now screw the counter jamb brackets to the top and 1 inch from the corner of the new aluminum sash. You may now put the new storm window into place.

Due to global warming and shifts in weather patterns storms, tornados, and hurricanes seem to hitting America more frequently and with higher intensity than ever before. Help protect your home by adding storm windows that can reduce drafts, heating and cooling costs, and help protect your home and family.

Posted in Energy Efficient Windows and Siding, Home Improvement, Home Improvement Tips, Replacement Windows | Tagged , , , , | Comments Off

Cutting Oak Flooring to Fit

Posted on April 5, 2011 by admin

Making sure your wood flooring fits correctly and adds value to your room is essential when you are making improvements to your home. Oak flooring can swell when wet so it is essential to get this right and make sure you have covered every angle.

Once purchased, your Oak flooring should be stored in a dry place away from any risk of damp areas that will cause the wood to swell and expand.

Continue reading →

Posted in Flooring, Hardwood Flooring, Home Improvement, Home Improvement Tips | Tagged , , , | Comments Off

Replacing a Window Pane

Posted on March 31, 2011 by admin

Since winter is quickly approaching, now is a great time to make sure that your home is ready for cold weather. Cracked or broken windows need to be repaired or replaced since these can cause severe cold air penetration. Replacing an entire window or window pane is very easy and can be done in a short amount of time. The following is an explanation of the steps involved in replacing a window or window pane.

First, you will need to get all of the necessary tools together. You will need:

  • Heavy Gloves-You will need these when removing the broken window and the glass that may be embedded in the grooves
  • Light Hammer-This will be used to tap the new glaze into the grooves around the new window
  • Screwdriver or Chisel-Use to extract old putty that might be embedded in the grooves
  • Sturdy Tweezers-These may be necessary to remove any leftover hard-to-reach glass chards
  • Soldering Iron-This will be used to soften old putty for easier removal
  • Sandpaper-Used to smooth the grooves after removing the old putty and glass
  • Exterior Paint-You will need this to touch-up any cracked paint and to use as a base after removing the old putty and broken window
  • Glazing Compound-This will be brushed into the grooves before replacing the new pane
  • Putty Knife-This can be used to embed and smooth the glazing compound around the window frame

It should be noted that you can cut the glass yourself. When doing so, you will need additional tools to include a workspace, a sturdy piece of plywood, a Ralter square, a hardware strip, and a glass cutter. However, most home improvement stores offer free glass cutting if you purchase the glass at their store. If you choose to do this, you will need the exact dimensions of the glass. A general rule of thumb is to measure the inside of the window frame and order the glass to be cut 1/16 to 1/8 of an inch smaller than the interior window dimensions.

The first step is removing the broken glass from the frame while wearing heavy gloves. You will need to remove any old putty at this point. If the putty is difficult to remove soften it using the soldering iron. You should be able to pry the remaining putty out of the grooves with a screwdriver or chisel. Be careful not to damage the grooves.

After the glass and putty are removed clean the window frame and coat with thinned exterior paint. After the paint is completely dry, apply a layer of glazing compound onto the grooves on all sides to help reinforce the window. Carefully place the window into the frame.

Now take the screwdriver or chisel and gently push the glaze halfway down into the groove every few inches of the frame. Take some fresh glazing compound and mold into a string about ½ inch wide, and press onto the interior all away around the window. Before the glaze dries, take the putty knife and press the glaze down around the edge. This should make a nice visual finish. Wait for at least a week then paint the window and the glaze, being careful not to paint the window shut, for further re-enforcement.

Replacing a window is not very difficult or time consuming and doing so will help lower electric bills. Now might be a good time to consider weather stripping while you are at it.

Posted in Energy Efficient Windows and Siding, Home Improvement, Home Improvement Tips, Replacement Windows | Tagged , , , , | Comments Off

Pros & Cons of Vinyl Siding

Posted on March 17, 2011 by admin

When you are faced with either buying a new home-which might be unlikely in today’s economy, or repairing or refurbishing your old home, you have a few choices to make. First of all, decide if the exterior of your home is in ill-repair or damaged. If so, you will need to either replace cracked or broken bricks or warped wood, or install vinyl siding. The following are a few pros and cons of vinyl siding. There is a debate as to whether vinyl is the way to go and a lot depends on personal preference. Here are a few tips that will help you make a decision that you will have to live with, or rather in, for years to come.

PROS

  • Vinyl Siding can be a lot less expensive than brick or wood
  • It is very easy to maintain and never has to be painted
  • It comes in a variety of colors (mostly light) and styles (scalloped, smooth, wood grain)
  • Most siding comes with a lifetime warranty
  • Vinyl Siding can be easily installed over the original home material (brick, wood) allowing the material base to breathe
  • It sheds water helping to alleviate mold and mildew
  • It is termite and dust mite resistant
  • Vinyl Siding has a beautiful, new appearance
  • It won’t rot which alleviates replacement
  • It can be trimmed with other materials such as wood for a less generic look
  • Everybody’s doing it

CONS

  • Vinyl siding can be very expensive depending on the type and grade that you are purchasing
  • It may be very difficult, in case of damage or fading, to find exact duplicate replacement siding that is the exact color or style of your current siding
  • It has not proven to be very weather resistant. Consider carefully because if you live in an area prone to tornados, hurricanes, or extremely bad storms, siding has not proven it’s durability or resistance to strong winds as well as brick, wood, or cement have
  • A lot of vinyl siding comes with a lifetime warranty but you should read the contract very carefully to find exact replacement clauses
  • The color fades over time
  • It is not as noise resistant as brick or wood
  • Vinyl siding will crack very easily after being exposed to extreme sunlight and inclement weather

  • It is very “cookie-cutter” in appearance leaving little room for visual personality and is unoriginal
  • It has proven to chalk over time
  • Vinyl Siding cannot be removed unless you are willing to replace all of the removed trim, fill all the nail holes leftover from the siding, and restore the beauty of the brick or wood by treating or replacing

While any choice comes with its own set of problems it generally boils down to personal preference. Whatever you decide, be sure that to do your research and price comparisons.

Posted in Home Improvement, Home Improvement Tips, Vinyl Siding | Tagged , , , , | Comments Off

How to Hire a Good Contractor

Posted on March 3, 2011 by admin

Ruth and Wade needed to convert their garage into an extra bedroom. Ruth’s father had passed away, leaving Ruth’s mother, Maxine, to fend for herself after 65 years of marriage. To help ease her grieving and loneliness the family decided that it would be a good idea for Maxine to move in with them. They wanted to give Maxine a maximum amount of living space, privacy and personal freedom so converting the garage was the most logical solution.

Wade, a very handy man in his own right, did not have the time to handle the project, so they turned to a contractor for this major home improvement. It was a time-sensitive matter, so they carefully took the following advice and precautions to make the renovation go as smoothly as possible.

  • Know exactly what you want renovated before tackling a home improvement project. Consider the interior and exterior of your home. Do you want the add-on to look like the rest of the house? If you have a brick home, will you want to use vinyl siding or wood on the exterior? If adding a room, do you want to add windows? If so, how many? Will you be adding a bathroom?
  • Consider hiring an architect. If there will be major structural changes to your home, as in the case of Ruth and Wade, an architect is trained to make the addition visually flow with the rest of the home. You don’t want something that still resembles a garage.
  • Do not rush. Take time to ask friends and family if they have ever used a reputable contractor in your area. Find at least two. If you know someone who made the same renovation(s), ask to see the finished product.
  • Accept no less than two bids. Multiple bids would be ideal. You don’t want to be ripped-off. To help cut costs, tell each contractor that you are taking multiple bids.
  • The contractor should be a member of at least one trade organization, and have property damage, personal liability, and workman’s comp insurance. He should be familiar with State and county laws pertaining to home improvement.
  • Know that a general contractor should be able to do the entire job and that a subcontractor has an area of specialization.
  • Once you select a contractor, you will need a contract. If you do not understand or have the time to read a contract, find an attorney.
  • Ask as many questions as possible and discuss the materials that you want, the time in which you want the job completed, and the total price for the project.
  • Avoid the common Bait and Switch scam in which the contractor will guarantee a job using specific materials and a certain price. Sometime after the onset of the project, the contractor will try to either upgrade the material or will tell you that the project is going to cost more than originally planned.
  • Oversee the project as much as possible. Don’t get in the way, but remember that it is your property. If the project is not going as you think it should, call the contractor. One reason that this project went very smoothly for the Richardson’s is because they lived on-site and were present during the renovation.

What could have easily been a nightmare for the Richardson’s and Maxine went very smoothly because they followed these home improvement rules and are quite happy with their new living arrangements and the renovation.

Posted in Home Improvement, Home Improvement Tips, Replacement Windows, Vinyl Siding | Tagged , , , , , | Comments Off

Gardening with the help of Green houses

Posted on February 17, 2011 by admin

A greenhouse gives a new dimension in growing and cultivation of exotic plants. By the method of cultivation using green house, this has created a new commercial purpose for growing new hybrids in plants and flowers.

greenhouse-construction

What is a greenhouse? The structure is like a room which is build of glass or plastic so that to trap the solar radiation within it and plants are grown with the help of that structure. The working theme of the greenhouse is the natural process where our Earth traps heat in the atmosphere. The heat from the sunlight is trapped within greenhouse in day time and most of the heat is trapped within this glass structure. This creates the perfect gardening conditions used for growing plants.

Types of greenhouses. Based on the material used to build the greenhouse, it is classified as either a glass greenhouse or plastic greenhouse.

Based on shape, greenhouses have various styles, where each style has its unique feature.

1. Span roof greenhouse: For growing a wide range of plants and to grow pot plants, this type of greenhouse is more adaptable, as we can have brick or wood in the base to the level we desired. Glass panels are used to line the sides and the roofs. It is multifunctional in summer and autumn, where during summer in the bed of the floors the plants which need more sun exposure would be grown while in winter plants like Chrysanthemums are grown in beds.

2. Dutch type: It is suitable to grow plants which need more sunlight for growing plants like tomatoes and lettuces. The slope end should be facing towards the outside. The disadvantage of this type of greenhouse is tall plants cannot be grown.

3. Lean to green house: It is built when there is less space available for a greenhouse. The wall of the greenhouse is adjoining to a wall from your existing house structure. It is useful to build this where the greenhouse is south facing and so exposed to as much sunlight as possible. The wall from the house gives warmth in winter and hence the temperature is maintained throughout the year uniformly.

4. Three quarter span greenhouse: This type is a modified version of the lean-to type of greenhouse. Here the sunlight from the northern part is allowed to enter. It is built such that the essential supplies are given to the greenhouse like electricity, gas and water supply.

5. Dome shaped: The common commercial greenhouses are usually dome shaped. Many prefer this shape because it has great wind resistance and maximum sunlight exposure in the summer. Other shapes like polygonal, poly-tunnel type of greenhouses are also popular for commercial use.

Related articles
Enhanced by Zemanta
Posted in Energy Efficient Windows and Siding | Tagged , , , , , , , , , , , , | Comments Off

5 Things you need to do to Protect Your Flooring this Christmas

Posted on November 23, 2010 by admin

You may have just decorated the house and had beautiful oak flooring put down in the front room. With Christmas a short fall away – the thought of dragging in a Christmas tree actually makes you feel sick. Start thinking about the procedures you can take to protect your floor from unnecessary damage.

  1. Christmas trees can stain the Hardwood surface, water damage, sap stains, or deep scratches on a well-loved hardwood floor.
  2. Assemble your tree on a protective sheet to guard against accidental scratches while you put it together. Place the tree within a stand but put a decorative sheet around it to prepare for manoeuvring.
  3. Using sheers- cut away any branches that maybe stuck out or straggling behind. It is useful to ensure that your tree is pruned and made less hazardous.
  4. Shake your Christmas tree gently before bringing it into the house. Dislodging the nettles will ensure that less will fall onto your wood flooring. Gently shake the tree as over shaking could cause more damage.
  5. Make sure there are enough hands available to carry the tree over the flooring- if you drag it on a hard wood surface you will risk leaving heavy scratch marks. Place the tree in an area that is away from furniture and products that may be in danger of being stained from excessive due fall.

If all fails buy an artificial tree as they last forever and will not damage your beautiful floor!

Posted in Flooring, Hardwood Flooring, Home Improvement, Home Improvement Tips | Tagged , , , , , , | Comments Off